:	Sep 15, 2004

:

This procedure requires the body to be removed from the integrated body frame.

:

In this procedure the front side member is replaced in cojunction with hood latch panel, front wheelhouse and the front crossmember.

.

Load vehicle onto ramp.

.

Disconnect both the battery cables.

.

L/H side: Remove the battery.

.

Remove the front fender.

.

Remove the hood latch panel.

.

Remove the front crossmember.

.

Remove the front wheelhouse.

.

Remove the hood.

.

Remove both hood support struts.

.

Remove the hood wiring harness.

.

Remove the plenum chamber panel.

.

Remove both wiper arms and blades.

.

L/H side: Remove the power steering fluid reservoir.

.

Remove the instrument panel.

.

Remove the insulation from outer and inner bulkhead.

.

R/H side: Release the ABS modulator.

.

R/H side: Remove the accelerator pedal.

.

L/H side: Remove the battery junction box.

.

Release the wiring harness from bulkhead.

.

Release the wiring harness from fender apron panel reinforcement.

.

Release the wiring harness from the side member.

.

L/H side: Remove the fuel fired booster heater.

.

Remove the scuff plate trim panel trim

.

Remove the footrest

.

Remove the cowl side trim panel.

.

Release the front carpet.

	.
		1 2

	.
		1

.

For additional information:   Welding.   Corrosion protection.   Tolerance checks.

.

Install is the reversal of removal.